James Hughes
Jan 20, 20202 min
Updated: Jun 21, 2022
Unfinished Poplar boards (2.5” x 1/8”)
Loctite (Clear Dry)
Square Tool Pencil
Next, you need to measure around the items in your drawer to figure out how big each compartment of your organizer will be.
Before cutting, first make a cut list.
A cut list is basically what it sounds like – a list of all the sized pieces that you need to cut. When making a cut list, be sure write down the largest pieces first and then the small pieces after. That way when you are cutting, you don’t run out of wood.
Once all of the pieces are cut out, dry-fit them into the drawer.
Use a pencil to mark all of the places where a board intersected another board. That way you can assemble to pieces outside of the drawer and would know where to put the Loctite glue.
Glue pieces together in arrangement to fit your layout.
Let each piece dry for a few minutes so that it won't fall apart. Then move the compartments into the drawer and used the Loctite again to glue the compartments to the sides of each drawer.